Heading 7214
HTS code 7214 — Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
- Chapter
- 72 — Iron and steel
- Tariff lines
- 18
- General duty
- Duty-free under the general rate
Tariff lines under heading 7214
Full 10-digit codes with their general (MFN) duty rates. The correct line depends on the product's material, construction, and use.
| HTS code | Description | General rate | Unit |
|---|---|---|---|
| 7214.10.0000 | Forged (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling) | Free | kg |
| 7214.20.0000 | Concrete reinforcing bars and rods (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling) | Free | kg |
| 7214.30.0010 | Containing by weight 0.1 percent or more of lead (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other, of free-cutting steel) | Free | kg |
| 7214.30.0080 | Other (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other, of free-cutting steel) | Free | kg |
| 7214.91.0016 | With a maximum cross section less than 152 mm (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other > Of rectangular (other than square) cross-section > Containing by weight less than 0.25 percent of carbon) | Free | kg |
| 7214.91.0020 | With a maximum cross section of 152 mm or more (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other > Of rectangular (other than square) cross-section > Containing by weight less than 0.25 percent of carbon) | Free | kg |
| 7214.91.0060 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other > Of rectangular (other than square) cross-section) | Free | kg |
| 7214.91.0090 | Containing by weight 0.6 percent or more of carbon (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other > Of rectangular (other than square) cross-section) | Free | kg |
| 7214.99.0016 | With a diameter less than 76 mm (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other > Other > Rounds > Containing by weight less than 0.25 percent of carbon) | Free | kg |
| 7214.99.0021 | With a diameter of 76 mm or more but not exceeding 152 mm (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other > Other > Rounds > Containing by weight less than 0.25 percent of carbon) | Free | kg |
| 7214.99.0026 | With a diameter exceeding 152 mm (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other > Other > Rounds > Containing by weight less than 0.25 percent of carbon) | Free | kg |
| 7214.99.0031 | With a diameter less than 76 mm (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other > Other > Rounds > Containing by weight 0.25 percent or more but less than 0.6 percent of carbon) | Free | kg |
| 7214.99.0036 | With a diameter of 76 mm or more but not exceeding 152 mm (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other > Other > Rounds > Containing by weight 0.25 percent or more but less than 0.6 percent of carbon) | Free | kg |
| 7214.99.0040 | With a diameter exceeding 152 mm (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other > Other > Rounds > Containing by weight 0.25 percent or more but less than 0.6 percent of carbon) | Free | kg |
| 7214.99.0045 | Containing by weight 0.6 percent or more of carbon (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other > Other > Rounds) | Free | kg |
| 7214.99.0060 | Containing by weight less than 0.25 percent of carbon (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other > Other > Other) | Free | kg |
| 7214.99.0075 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other > Other > Other) | Free | kg |
| 7214.99.0090 | Containing by weight 0.6 percent or more of carbon (Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling > Other > Other > Other) | Free | kg |
Documents required to import under 7214
Customs paperwork typically required to import these goods into the United States. Conditional items depend on shipment value, transport mode, or origin.
- Commercial InvoiceRequired
- Packing ListRequired
- Bill of Lading / Airway BillRequired
- CBP Entry Summary (7501)Required
Prepared and filed by your customs broker
- CBP Entry / Release (3461)Required
Prepared and filed by your customs broker
- Customs Bond (CBP 301)Conditional
Required for formal entries — generally shipments valued over $2,500
Single-entry or continuous bond, obtained through your broker or a surety
- Importer Security Filing (ISF "10+2")Conditional
Required for ocean freight only
Filed electronically at least 24 hours before loading at the foreign port
- Importer ID Input Record (CBP 5106)Conditional
Required to establish or update your importer-of-record number with CBP
One-time setup for a new importer; not filed per shipment
- Entry Manifest (CBP 7533)Conditional
Alternative to the 3461 for informal, low-value, or contiguous-country entries
Common questions
- What is HTS code 7214?
- HTS heading 7214 covers other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. It sits in Chapter 72 (iron and steel) of the US Harmonized Tariff Schedule and contains 18 tariff lines.
- What is the duty rate for HTS 7214?
- Duty-free under the general rate. The general rate applies to most-favoured-nation trading partners; goods from countries with a free trade agreement may qualify for a reduced or duty-free special rate.
- How many digits does a full HTS code have?
- US import entries require the full 10-digit HTS code. Heading 7214 is the first four digits — the remaining six narrow it down to the specific product, which is what determines the duty rate you actually pay.
Related headings in Chapter 72
- 7201Pig iron and spiegeleisen in pigs, blocks or other primary forms
- 7202Ferroalloys
- 7203Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms
- 7204Ferrous waste and scrap; remelting scrap ingots of iron or steel
- 7205Granules and powders, of pig iron, spiegeleisen, iron or steel
- 7206Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203)
- 7207Semifinished products of iron or nonalloy steel
- 7208Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated