Heading 7228
HTS code 7228 — Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel
- Chapter
- 72 — Iron and steel
- Tariff lines
- 35
- General duty
- Duty-free under the general rate
Tariff lines under heading 7228
Full 10-digit codes with their general (MFN) duty rates. The correct line depends on the product's material, construction, and use.
| HTS code | Description | General rate | Unit |
|---|---|---|---|
| 7228.10.0010 | Not cold-formed (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Bars and rods, of high-speed steel) | Free | kg |
| 7228.10.0030 | With a maximum cross-sectional dimension of less than 18 mm (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Bars and rods, of high-speed steel > Cold-formed) | Free | kg |
| 7228.10.0060 | With a maximum cross-sectional dimension of 18 mm or more (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Bars and rods, of high-speed steel > Cold-formed) | Free | kg |
| 7228.20.1000 | Not cold-formed (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Bars and rods, of silico-manganese steel) | Free | kg |
| 7228.20.5000 | Cold-formed (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Bars and rods, of silico-manganese steel) | Free | kg |
| 7228.30.2000 | Of ball-bearing steel (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded > Of tool steel (other than high-speed steel)) | Free | kg |
| 7228.30.4000 | Of chipper knife steel, not cold-formed (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded > Of tool steel (other than high-speed steel)) | Free | kg |
| 7228.30.6000 | Other (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded > Of tool steel (other than high-speed steel)) | Free | kg |
| 7228.30.8005 | Of high-nickel alloy steel (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded > Other) | Free | kg |
| 7228.30.8010 | Concrete reinforcing bars and rods (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded > Other) | Free | kg |
| 7228.30.8015 | With a diameter or cross section measuring less than 76 mm (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded > Other > Other) | Free | kg |
| 7228.30.8041 | With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded > Other > Other) | Free | kg |
| 7228.30.8045 | With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded > Other > Other) | Free | kg |
| 7228.30.8070 | With a diameter or cross section exceeding 228 mm (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded > Other > Other) | Free | kg |
| 7228.40.0000 | Other bars and rods, not further worked than forged (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel) | Free | kg |
| 7228.50.1010 | Of ball-bearing steel (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than cold-formed or cold-finished > Of tool steel (other than high-speed steel)) | Free | kg |
| 7228.50.1020 | Of round or rectangular cross section with surfaces ground, milled or polished (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than cold-formed or cold-finished > Of tool steel (other than high-speed steel) > Other > With a maximum cross-sectional dimension of less than 18 mm) | Free | kg |
| 7228.50.1040 | Other (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than cold-formed or cold-finished > Of tool steel (other than high-speed steel) > Other > With a maximum cross-sectional dimension of less than 18 mm) | Free | kg |
| 7228.50.1060 | Of round or rectangular cross section with surfaces ground, milled or polished (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than cold-formed or cold-finished > Of tool steel (other than high-speed steel) > Other > With a maximum cross-sectional dimension of 18 mm or more) | Free | kg |
| 7228.50.1080 | Other (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than cold-formed or cold-finished > Of tool steel (other than high-speed steel) > Other > With a maximum cross-sectional dimension of 18 mm or more) | Free | kg |
| 7228.50.5005 | Of high-nickel alloy steel (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than cold-formed or cold-finished > Other) | Free | kg |
| 7228.50.5015 | With a diameter or cross section measuring less than 76 mm (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than cold-formed or cold-finished > Other > Other) | Free | kg |
| 7228.50.5040 | With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than cold-formed or cold-finished > Other > Other) | Free | kg |
| 7228.50.5070 | With a diameter or cross section exceeding 228 mm (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods, not further worked than cold-formed or cold-finished > Other > Other) | Free | kg |
| 7228.60.1030 | Of ball-bearing steel (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods > Of tool steel (other than high-speed steel)) | Free | kg |
| 7228.60.1060 | Other (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods > Of tool steel (other than high-speed steel)) | Free | kg |
| 7228.60.6000 | Not cold-formed (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods > Other) | Free | kg |
| 7228.60.8000 | Cold-formed (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Other bars and rods > Other) | Free | kg |
| 7228.70.3010 | U, I, H and T sections (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Angles, shapes and sections > Hot-rolled, not drilled, not punched and not otherwise advanced) | Free | kg |
| 7228.70.3020 | Angles (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Angles, shapes and sections > Hot-rolled, not drilled, not punched and not otherwise advanced > Other > With a maximum cross-sectional dimension of 76 mm or more) | Free | kg |
| 7228.70.3041 | Other (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Angles, shapes and sections > Hot-rolled, not drilled, not punched and not otherwise advanced > Other > With a maximum cross-sectional dimension of 76 mm or more) | Free | kg |
| 7228.70.3060 | Angles (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Angles, shapes and sections > Hot-rolled, not drilled, not punched and not otherwise advanced > Other > With a maximum cross-sectional dimension of less than 76 mm) | Free | kg |
| 7228.70.3081 | Other (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Angles, shapes and sections > Hot-rolled, not drilled, not punched and not otherwise advanced > Other > With a maximum cross-sectional dimension of less than 76 mm) | Free | kg |
| 7228.70.6000 | Other (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel > Angles, shapes and sections) | Free | kg |
| 7228.80.0000 | Hollow drill bars and rods (Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel) | Free | kg |
Documents required to import under 7228
Customs paperwork typically required to import these goods into the United States. Conditional items depend on shipment value, transport mode, or origin.
- Commercial InvoiceRequired
- Packing ListRequired
- Bill of Lading / Airway BillRequired
- CBP Entry Summary (7501)Required
Prepared and filed by your customs broker
- CBP Entry / Release (3461)Required
Prepared and filed by your customs broker
- Customs Bond (CBP 301)Conditional
Required for formal entries — generally shipments valued over $2,500
Single-entry or continuous bond, obtained through your broker or a surety
- Importer Security Filing (ISF "10+2")Conditional
Required for ocean freight only
Filed electronically at least 24 hours before loading at the foreign port
- Importer ID Input Record (CBP 5106)Conditional
Required to establish or update your importer-of-record number with CBP
One-time setup for a new importer; not filed per shipment
- Entry Manifest (CBP 7533)Conditional
Alternative to the 3461 for informal, low-value, or contiguous-country entries
Common questions
- What is HTS code 7228?
- HTS heading 7228 covers other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel. It sits in Chapter 72 (iron and steel) of the US Harmonized Tariff Schedule and contains 35 tariff lines.
- What is the duty rate for HTS 7228?
- Duty-free under the general rate. The general rate applies to most-favoured-nation trading partners; goods from countries with a free trade agreement may qualify for a reduced or duty-free special rate.
- How many digits does a full HTS code have?
- US import entries require the full 10-digit HTS code. Heading 7228 is the first four digits — the remaining six narrow it down to the specific product, which is what determines the duty rate you actually pay.
Related headings in Chapter 72
- 7201Pig iron and spiegeleisen in pigs, blocks or other primary forms
- 7202Ferroalloys
- 7203Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms
- 7204Ferrous waste and scrap; remelting scrap ingots of iron or steel
- 7205Granules and powders, of pig iron, spiegeleisen, iron or steel
- 7206Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203)
- 7207Semifinished products of iron or nonalloy steel
- 7208Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated